Mixing Technologies

Portable Mixers

 

PO-Series

Portable mixers provide a solution for all small volume agitation, heat transfer, flocculation and solids suspension applications. Portable mixers are small enough to move around your production area as required and remove when not in use, yet robust enough to stand up to harsh industrial environments for years of reliable service. These mixers are available in a variety of mounting configurations to suit almost all small volume mixing applications.

Standard Features

  • Power: 0.25kW ~ 2.2kW, 415v/3Ph/50Hz, IP56
  • Mixing Volume: < 2000 L
  • Shaft Length: < 2m
  • Mounting Arrangement: Pipe Stand / Base Plate / Drum Clamp / G-Clamp / IBC

JM Engineering mixers can be customised to suit all mixing applications. If the options you require are not listed below, please contact us to discuss your requirements.
pdf-icon

Download Factsheet

 

Drive Options

Our standard mixers are equipped with a 415V/3Ph/50Hz motor for Australian mains power supply. To cater for all applications and environments, our power options include: –

  • 415V / 3Ph / 50 Hz or 240V/1Ph/50Hz
  • 2-Pole, 4-Pole or 8-Pole
  • International Power Specifications
  • Flame Proof or Explosion Proof Motors
  • Fixed speed or Variable Speed
  • IP55, IP56 or IP66 Protection Rating

Mounting Options

Portable mixers are supplied in a variety of mounting options to cater for various applications. These options include:

  • Pipe Stand – Stand alone unit, usually bolted to the floor
  • Drum Clamp – Clamps securely to a standard 205L drum bung
  • G-Clamp – Clamps directly to the vessel side or suitable structure
  • IBC Mounted – Clamps to an industry standard IBC frame
  • Base Plate Mount – Bolts to an overhead bridge or similar structure

Material Options

Portable mixers are supplied with stainless steel wetted parts (impeller and shaft) and carbon steel mounting structures. All exposed carbon steel is coated to our painting specifications for maximum corrosion protection. Other material options include:

    • Stainless Steel: 304 / 316
    • Duplex Stainless Steel: SAF2205 / SAF2507
    • Carbon Steel: GR250 / GR350 / 4140
    • Exotic Alloys: IN-600 / Ti-2

Coating Options

JM Engineering can provide a range of coating options for all types of mixers and impellers. This ensures a long, trouble free life in a variety of environmental conditions.  Select from our standard range of coating systems, or we can supply to your own specifications. Standard options include:

  • JM1 Standard Enamel– Raw surfaces blasted to AS1627 Class 2.5 and 50-60 um profile, followed by 1 coat of enamel primer and 2  enamel top coats, totalling 150 um thickness. Standard colour is AS2700 Y14 Golden Yellow.
  • JM4 Standard Epoxy – Raw surfaces blasted to AS1627 Class 2.5 and 50-60 um profile, followed by 1 coat of epoxy phosphate primer and 2  recoatable polyurethane top coats, totalling 175 um thickness. Standard colour is AS2700 Y14 Golden Yellow.
  • JM9 Premium Expoy – Raw surfaces blasted to AS1627 Class 2.5 and 50-60 um profile, followed by 1 coat of epoxy phosphate primer, 1 coat of surface tolerant high build epoxy and 1 coat of recoatable polyurethane top coats, totalling 250 um thickness. Standard colour is AS2700 Y14 Golden Yellow.