Mixing Technologies

Ribbon Blenders

 

RB-Series
Ribbon blenders (or ribbon mixers) are an efficient method of mixing and heat transfer in granular and powdered products. These are suitable for small batch applications such as agricultural feed blending to large, continuous operations such as process plant powder mixing, and everything in between.

Standard Features

  • Power: 1.5kW ~ 75+ kW, 415v/3Ph/50Hz, IP56
  • Mixing Volume:
  • Shaft Length: < 1 m ~ 10+ m
  • Mounting Arrangement: Stand-alone Floor Mount

JM Engineering mixers can be customised to suit all mixing applications. If the options you require are not listed below, please contact us to discuss your requirements.
pdf-icon

Download Factsheet

 

Drive Options

Our standard mixers are equipped with a 415V/3Ph/50Hz motor for Australian mains power supply. To cater for all applications and environments, our power options include: –

  • 415V / 3Ph / 50 Hz or International Power Specifications
  • International Power Specifications
  • Flame Proof or Explosion Proof Motors
  • Fixed speed or Variable Speed
  • IP55, IP56 or IP66 Protection Rating

Outlet Connection Options

Ribbon blenders are supplied standard with a flanged outlet fitting. This may be customised to suit other applications. Outlet connection options include:

  • Centre or End Outlet
  • Threaded Connection (BSP, NPT, ISO)
  • Flange Connection (ANSI, AS Table D / E)
  • Tri-clamp Saniatry Fitting
  • Plain Pipe or Tube

Material Options

Ribbon Blenders are supplied with stainless steel wetted parts (impeller and shaft) and mixing trough. Other material options include:

    • Stainless Steel: 304 / 316
    • Duplex Stainless Steel: SAF2205 / SAF2507
    • Carbon Steel: GR250 / GR350 / 4140
    • Exotic Alloys: IN-600 / Ti-2

Coating Options

JM Engineering can provide a range of coating options for all types of mixers and impellers. This ensures a long, trouble free life in a variety of environmental conditions.  Select from our standard range of coating systems, or we can supply to your own specifications. Standard options include:

  • JM1 Standard Enamel– Raw surfaces blasted to AS1627 Class 2.5 and 50-60 um profile, followed by 1 coat of enamel primer and 2  enamel top coats, totalling 150 um thickness. Standard colour is AS2700 Y14 Golden Yellow.
  • JM4 Standard Epoxy – Raw surfaces blasted to AS1627 Class 2.5 and 50-60 um profile, followed by 1 coat of epoxy phosphate primer and 2  recoatable polyurethane top coats, totalling 175 um thickness. Standard colour is AS2700 Y14 Golden Yellow.
  • JM9 Premium Expoy – Raw surfaces blasted to AS1627 Class 2.5 and 50-60 um profile, followed by 1 coat of epoxy phosphate primer, 1 coat of surface tolerant high build epoxy and 1 coat of recoatable polyurethane top coats, totalling 250 um thickness. Standard colour is AS2700 Y14 Golden Yellow.